Select Page

Crystal Oscillators

Brand:

Description

Output Logic /Waveform Product Series Product Description Available Frequency Rangee Pdf spec. sheet by Supply Voltages (volts)
HB Programmable clocks for quick-turn 1.0 ~ 200.0 MHz 1.8 V 2.5 V 3.3 V
HTQN Quick-Turn clock oscillators. 10~245MHz. 1.0ps(typical) 10 ~ 245 MHz 2.5 V 3.3 V
HY Wide Operating Temperature range from -40 °C to +125 °C 1.25 ~50.0 MHz 1.8 V 2.5 V 3.3 V
H, SWO General purpose clocks. Low cost, Excellent phase noise and jitter, High performance 20.0 KHz ~ 160.0 MHz 1.0 V 1.5 V 1.8 V 2.5 V 3.3 V 5.0 V
CML HCQJF 4 Frequencies Switchable Crystal Oscillators [ Quick-turn Clock Oscillators , 15 ~ 2100 MHz ] 15 ~ 2100MHz 1.8 V 2.5 V 3.3 V
HQJF High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical 15~2100MHz 1.8 V 2.5 V 3.3 V
CMOS HA ● HAxx series features AT-cut crystal for it’s high frequency stability while enjoys uA low current consumption that would normally only available from X-cut tuning forl crystal .
● 32.768 KHz is popular for Real Time Clock and other timing applications .
● For even tighter frequency stability ( ± 5 ppm over -40 to 85 °C ) and lower current consumption ( 1.2 uA at 3.3V ) , please contact Mercury .
10.0 ~ 100.0 KHz 1.8 V 2.5 V 3.3 V
HCTJF 4 Frequencies Switchable Crystal Oscillators [ Quick-turn Clock Oscillators , 15 ~ 2100 MHz ] 15 ~ 2100MHz 1.8 V 2.5 V 3.3 V
HCTQF Quick Turn Dual output Oscillators. 10~245MHz 1.5ps(typical) 10 ~ 245 MHz 2.5 V 3.3 V
HJ ●Mercury’s HJ Series is an ultra low phase noise crystal clock oscillator providing a much better phase noise & jitter performance, compared to standard clocks .
● With an output frequency of 49.152MHz, the phase noise jitter is 48 fsec (RMS, 12 KHz to 20 MHz) with a supply voltage (VDD) of +3.3V applied
20.0 ~ 50.0 MHz 1.8 V 2.5 V 3.3 V
HM EMI Reducion Spread Spectrum Clocks (SSXOs) 3.5 ~ 220.0 MHz 3.3 V
HTJF High Frequency Ultra-low jitter Crystal Oscillators RMS Jitter 150 fsec typical. 150 ~ 250 MHz 1.8 V 2.5 V 3.3 V
HTQF Quick-Turn clock oscillators. 10~245MHz. 1.0ps(typical) 10 ~ 245 MHz 2.5 V 3.3 V
H, SWO General purpose clocks. Low cost, Excellent phase noise and jitter, High performance 20.0 KHz ~ 160.0 MHz 2.5 V
HCSL HCCJF 4 Frequencies Switchable Crystal Oscillators [ Quick-turn Clock Oscillators , 15 ~ 2100 MHz ] 15 ~ 700MHz 1.8 V 2.5 V 3.3 V
HCJF High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical 150~700MHz 1.8 V 2.5 V 3.3 V
HCK ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. 13.5 ~ 200.0 MHz 2.5 V 3.3 V
LVDS HCDJF 4 Frequencies Switchable Crystal Oscillators [ Quick-turn Clock Oscillators , 15 ~ 2100 MHz ] 15 ~ 2100MHz 2.5 V 3.3 V
HCDQF Quick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
HDJF High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical 150~2100MHz 2.5 V 3.3 V
HDK ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. 13.5 ~ 200.0 MHz 2.5 V 3.3 V
HDQF Quick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
HDQN Quick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
LVPECL HCPJF 4 Frequencies Switchable Crystal Oscillators [ Quick-turn Clock Oscillators , 15 ~ 2100 MHz ] 15 ~ 2100MHz 2.5 V 3.3 V
HCPQF Quick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
HPJF High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical 150~2100MHz 2.5 V 3.3 V
HPK ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. 13.5 ~ 200.0 MHz 2.5 V 3.3 V
HPQF Quick-Turn clock oscillators. 10~1450MHz. 0.6ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
HPQN Quick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical) 10 ~ 1450 MHz 2.5 V 3.3 V
True Sine HS 50 ohms load. Multiplier is used for 55+ MHz 10.0 ~ 200.0 MHz 3.3 V 5.0 V