Select Page

Serial to Ethernet Converter Module USR-TCP232-T2

Serial TTL to Ethernet Module

Brand:

Description

USR-TCP232-T2 is a Low Cost Solution Serial TTL to Ethernet Module, It supports data transferred over LAN network or Internet to remote serial port.

  • Cost Effective
  • VCC 3.3V or VDD 5V
  • Web page configuration / DHCP & DNS
System Information
Processor ARM
Flash 32K byte
Ethernet
Port Number 1
Interface Standard RJ45
Rate 10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection
Protection 2KV electromagnetism isolation
Network Protocol IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP
Buffer Send: 6K bytes, receive: 4K bytes
Serial
Port Number 1
Interface Standard TTL
Data Bits 5, 6, 7, 8
Stop Bit 1, 2
Check Bit None, Even, Odd, Space, Mark
Baud Rate 600 bps ~ 460.8 Kbps
Flow Control Null
Buffer Receive: 800 bytes
RS-485 Pull-up and Pull-Down Resistor Null, reserved 485 send-receive control pin
Software
Virtual Serial(USR-VCOM) Windows 2000 or higher (32 bit/64 bit)
Configuration computer set-up software, serial command, built-in webpage, AT command
Basic Parameter
Size 50.5 x 22.6 x 15.0 mm
Operating Temp. -25~ 75°C
Storage Temp. -40 ~ 105°C, 5 ~ 95% RH
Input Voltage
VCC DC 3.0V~3.6V
VDD DC 4.75~7.0V
Working Current
150mA (aver) / 160mA (max) @3.3V
150mA (aver) / 160mA (max) @5V
Power <1W

Download

Datasheet

User Manual