USR-TCP232-410S

Description

USR-TCP232-410S is a Industrial grade design with TI Cortex-M4 Solution. RS232/ RS485 ports can work simultaneously.

1 RS232 and 1 RS485 Modbus to Ethernet converters.
1 RS232 and 1 RS485 Modbus Serial to Ethernet Converters.
Power supply accepts wide voltage input range DC 5-36V.
Support TCP server/client, UDP server/client, https client, Virtual COM.
Support Modbus RTU to Modbus TCP.
Support flow control CTS/RTS, XON/XOFF.
Support 1 RS-232,1 RS-485 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface.
Configuration via Web Server page, AT commands, and Windows Utility.

Modbus to Ethernet Converters USR-TCP232-410S can realize bi-directional transparent transmission between RS232/RS485 and Ethernet RS232/RS485 ports can work at same time, not affect each other.
Industrial Solution
- Based on TI Cortex M4 Solution, signal processing more efficient and reliable.
- Equipped with optimized TCP/IP protocol stack, stable and reliable, Modbus to Ethernet converters USR-TCP232-410S.
- Can realize bi-directional transparent transmission efficiency.
- Work Temp: -40 ~85C, Supports hardware watchdog to keep it work stable.
Multiple Working Modes – Modbus to Ethernet converters USR-TCP232-410S support 5 work modes: TCP Server, TCP Client, UDP Client, UDP Server and httpsD Client. Configure simply and it can realize data transmission.
- TCP Client
- TCP Server
- UDP Client
- UDP Server
- httpsD Client

Virtual COM – Solve the problem that PC software cannot communicate with network and equipment as a serial port.
Identification of broken network, automatically wired – Solve the identification of dead links easily, automatic reconnection, prevent data loss due to power outages, disconnection.
Modbus gateway – Polling mechanism can solve the problem of sticky congestion effectively, which is caused by data concurrency.
Customize built-in webpage for users Web to Serial – Design built-in webpages according to project requirements and realize webpage control, web page data acquisition and other functions.

- Electrical Fire Network Monitoring
- Smart Lighting Facilities in Factories and Mines Monitoring
- Water Supply System Monitoring

System Information
Processor	Cortex-M4
Basic Frequency	120MHz
Flash	512K byte
Ethernet
Port Number	1
Interface Standard	RJ45
Rate	10/100 Mbps MDI/MDIX, auto switch between cross and direct connection
Protection	2KV electromagnetism isolation, shell insulation blocking
Network Protocol	IP, TCP, UDP, DHCP, DNS, https, ARP, ICMP, Web socket, httpsd client
Receive Buffer	Max 16k bytes buffer
Serial
Port Number	2 (1RS-232, 1RS-485, can work at the same time)
Interface Standard	RS-232: DB9 pin type, RS-485: 3 wire (A+, B-, G)
Data Bits	5, 6, 7, 8
Stop Bit	1, 2
Check Bit	None, Even, Odd, Space, Mark
Baud Rate	RS-232: 600 bps ~ 230K bps, RS-485: 600 bps ~ 1M bps
Flow Control	RTS/CTS
Buffer	Send and receive 2k bytes respectively
Protection	RS-485: anti-static 2KV, lightning protection
RS-485 Pull-up and Pull-Down Resistor	2.2 KΩ
Software
Virtual Serial（USR-VCOM）	Windows 2000 or higher (32 bit/64 bit)
Configuration	Built-in webpage, computer set-up software, serial command
Basic Parameter
Size	80 x 62 x 24 mm
Operating Temp.	-40 ~ 85°C
Storage Temp.	-45 ~ 105°C, 5 ~ 95% RH
Input Voltage	DC 5 ~ 36V
Working Current	86.5mA(aver)@ 5V 44.3mA(aver)@ 12V
Power	<1W